Orders over $99 ship FREE within the 48 contiguous states.

Orders over $99 ship FREE within the 48 contiguous states.

Small Sawtooth Nailess Black


Size: 10 pack ($0.23 Each)

About the product

    The small nailess sawtooth hanger is a two-pronged hanger that can be attached to a wood picture frame without screws or nails. Their tempered steel finish allows nailess sawtooth hangers to be hammered into position without deforming and installed quickly.

    • Self-attaching no-nail sawtooth hangers for wood frames

    • Measures 1/4" wide and 1" long

    • Supports lightweight art up to 7 lbs

    • No additional hardware needed

    • Steel with a black oxide finish


    1. Lay the frame face down on a blanket or soft surface.

    2. Position the nailess sawtooth so that it’s centered left-to-right on the top rail, a little down from the upper edge of the frame. The serrated edge should face down.

    3. If installing on extremely hard wood, drill small pilot holes for the nailess sawtooth hanger’s legs.

    4. Use a small hammer to tap the nailess sawtooth hanger in place, taking care not to break the glass on the frame, if any. When properly seated, the shoulders of a nailess sawtooth hanger should rest on the surface of the frame rail, leaving approximately a 1/8" gap between the back of the hanger and the surface of the rail.

    5. Hang the picture on the wall, ensuring the nail in the wall is tight and secure before using it to hang the frame. TIP: Always use a headed nail, not a brad, and position the frame on the nail so that the nail is caught firmly on the sawtooth hanger.

    Related Content

    Everything You Need to Know About Sawtooth Hangers

    Do’s and Don’ts When Using Sawtooth Hangers

    The Best Hangers for Lightweight Art