Orders over $99 ship FREE within the 48 contiguous states.

Orders over $99 ship FREE within the 48 contiguous states.

Economy Plastic Hanger | Hang Tabs


Size: 10 Pack ($0.5 Each)

About the product

Foamboard plastic hangers are high-density, self-sticking, clear plastic hangers with a pressure-sensitive adhesive on one side. They are used as temporary hanging solutions for light-duty applications. Economy hangers can also be used on other types of smooth surface board like cardboard, poster board, illustration board, etc.

  • Self-sticking plastic hanger for very light items on foamboard

  • Measures 2" long, 2" wide, and .02" thick

  • Holds 1 lb (1 hanger) to 2 lbs (2 hangers)


  1. Mark the position of the hanger on the foam board. Once pressed in place, plastic foamboard hangers cannot be repositioned or removed without damaging the substrate.

  2. Wipe the surface of the foam board clean. The surface of what you’re hanging should be clean, dry, and free from grease/oil.

  3. Peel off the adhesive release paper on the economy hanger, then stick the hanger to the back of the foam board.

  4. Press the hanger firmly onto the foam board and rub it down evenly using a hard and smooth object a few times. 

  5. Wait at least 24 hours before hanging to allow the adhesive to strengthen. Then, bend the upper portion of the hanger back slightly to hang.

  6. Hang the foam board on picture hooks, nails, or screws. Note: Do not use wire in combination with foamboard plastic hangers. Picture wire can slice through the plastic over time. In addition, economy hangers are for indoor use only. Extreme cold or heat may cause the adhesive to fail.

  7. When removing a plastic hanger, take care not to tear away any more substrate material than necessary. Do not attempt to reuse after removal as economy plastic hangers are intended for one-time use only.

Related Content

Everything You Need To Know About Foam Board Hangers