Single Strap Adjustable Hangers (Pair)
S-HWR-190
About the product
Single strap adjustable hangers change the game in picture hanging with their innovations in adjustability and durability. This two-part hanger features a D-ring-compatible hook on a slotted strap and a heavy-duty wall mount. The teeth on the hanger strap are only 1/16”, providing incredible precision when you adjust a picture. Tested and made with powerful nylon fiberglass, these wall hangers can carry beyond their standard weight capacity with the help of a Molly bolt.
-
Adjustable strap hanger hooks for hanging picture frames with D-rings
-
Measures 5" long and 0.6" wide, wall mount measures 1.5” long and 1” wide
-
Teeth portion measures 3.8” long and 0.5” wide
-
Holds up to 300 lbs with two hangers (Rated at 150 lbs per hanger)
-
Up to 200 lbs per hanger with a Molly bolt
-
Picture hanging kit includes two (2) Single Strap Adjustable Hangers and eight (8) Steel Hook Nails (4 per hanger)
-
Use in conjunction with compatible D-rings or picture wire: Wide 1-Hole D-Ring, 2-Hole D-Ring, Large Strap Hanger, Mega Strap Hanger
-
Nylon fiberglass combination
Instructions
-
Push the lever on the wall mount and pull the adjustable strap out.
-
Position the wall mount on the wall. Then install it by hammering the nails provided into each nail hole.
-
Assemble the hanger by pressing on the lever and pushing the hanger strap upwards to your desired position. You can adjust the hanger up to 1 1/2" up and down.
-
Measure the distance of your frame’s side rails. Install the second hanger based on this distance by repeating steps 1-3. Make sure the two picture hangers are aligned evenly with each other.
-
Hang the frame using D-rings or picture wire. (Refer to product description above for list of compatible D-rings.) Adjust the height on the hanger as desired.
-
For a stronger hold, install a ¼” x 20 Molly bolt (not included) into the hole at the top of the hanger.
-
Pencil mark the position of the Molly bolt hole on the wall. Then pull the hanger strap out of the wall mount.
-
Drill the hole for the Molly bolt.
-
Reassemble the adjustable strap and reposition it on the wall.
-
Install the Molly bolt and secure the strap using a screwdriver.
Related Content
Everything You Need to Know About Adjustable Picture Hanging Hardware
Frequently Asked Questions
Q How much weight can the Single Strap Adjustable Hangers (Pair) hold?
Each Single Strap Adjustable Hanger is rated at 150 lbs. When used as a pair (included in this kit), they support up to 300 lbs combined. For even greater capacity, install a Molly bolt for up to 200 lbs per hanger.
Q What surfaces does the Single Strap Adjustable Hangers (Pair) work with?
The Single Strap Adjustable Hangers (Pair) is compatible with drywall, plaster, wood panel.
Q How do I install the Single Strap Adjustable Hangers (Pair)?
Hammer the included nails into the wall mount, then press the lever and slide the adjustable strap to your desired position. You can adjust up to 1 1/2" up and down for precise alignment.
Q What comes with the Single Strap Adjustable Hangers (Pair)?
Includes two (2) Single Strap Adjustable Hangers. See the product listing for the full contents.
Q Why choose the Single Strap Adjustable Hangers (Pair) over a standard hook?
The Single Strap Adjustable Hangers (Pair) lets you fine-tune your frame's height after installation—without making new holes. Ideal for gallery walls or multi-frame arrangements where precise alignment matters.