Lead Anchor #10-#14 x 1 1/2 inch | Wall Anchor for Brick or Concrete - 10 Pack
S-SC-ALEAD1X
About the product
Lead anchors are wall anchors that support wall hangers in medium-duty applications such as hanging standard-size artwork, mirrors, and other decor. It’s also compatible with the T-head security screw for locking artwork on solid or masonry surfaces.
-
Lead anchor for medium-duty applications on brick, concrete block, or concrete walls
-
Compatible with #10 - #14 screws
-
Includes ten (10) lead anchors
-
Requires 5/16" masonry drill bit
Instructions
-
Drill a pilot hole on the wall using a drill bit that’s slightly smaller than the diameter of the anchor. Be careful not to drill too deeply as this can cause wall damage. Tip: Use masking tape to mark the depth or the length of the screw you will install.
-
Insert the anchor, then tap it lightly with a hammer until it is flush with the wall.
-
With the anchor in place, screw in the item you want to hang. Note: Ensure you use the correct screw size for the anchor and avoid overtightening it as this can damage the anchor.