Cleat Flare 10 inch - pair
S-CLEAT-10F
About the 10-inch Flare Cleat
- 10 inch cleat supports 50 pounds
- Each cleat is 1.25 inch tall. When interlocked the pair is 1.875 inches tall
- Aluminum cleat is 3/64 inch thick and made of aircraft-grade aluminum
- Wall standoff is 5/16 inch
- Holes are one inch on center and alternate from large to small hole. Alternating holes allow you to easily level the cleat and/or use larger screws in studs. Small screw hole accommodates up to #8 screw and large screw hole accommodates up to #12 screw
- You can cut aluminum cleats to smaller lengths with any carbide tip saw. Note, the weight supported is 60 pounds per linear foot of cleat
- The flare shape of the cleat makes it easier to engage the two cleats and allows some flexibility on non-plumb walls
Related Content
What is a French Cleat Hanger and Why You Need Them
How to Choose the Proper Aluminum French Cleats
Frequently Asked Questions
Q What is the Cleat Flare 10 inch - pair used for?
About the 10-inch Flare Cleat 10 inch cleat supports 50 pounds Each cleat is 1.25 inch tall. When interlocked the pair is 1.875 inches tall Aluminum cleat is 3/64 inch thick and made of aircraft-grade
Q What surfaces does the Cleat Flare 10 inch - pair work with?
Check the product listing for surface and wall compatibility details.
Q How do I install the Cleat Flare 10 inch - pair?
One cleat attaches to the back of your frame and the other mounts to the wall using screws and anchors. The two beveled pieces interlock to create a secure hold. You'll need a drill or screwdriver and a level.
Q Is the Cleat Flare 10 inch - pair available in bulk?
Check the product listing for current pack sizes and bulk pricing options. Starting at $5.24.
Q How does the security locking mechanism work?
Security kits use a locking mechanism that requires a special security wrench to remove. This prevents unauthorized removal of frames in galleries, hotels, offices, and public spaces.