Adhesive Picture Hanger | Zig-Zag Hanger
S-HWR-108X
About the product
Adhesive picture hangers or zig-zag hangers are light duty hangers made of high-density plastic twice as thick as other foamboard hangers of this type. A pressure-sensitive foam-backed adhesive on one side grips the smooth surface of the foam board tenaciously. Adhesive hangers are perfect for hanging lightweight artwork, photos, matted prints, posters, etc.
-
Clear plastic sawtooth self-sticking picture hanger for picture frames and foam core hangers
- Made of .031 natural polypropylene
-
Measures 2 1/2" long, 1 7/8" wide, and .04" thick
-
Holds up to 3 lbs
-
Strong adhesive
-
Made in the USA
Instruction
-
Wipe the surface of the foam board clean. The surface of what you’re hanging should be clean, dry, and free from grease/oil.
-
Remove the paper backing on the adhesive sawtooth hanger, then stick the hanger to the back of the foam board.
-
Press the hanger firmly onto the foam board and rub it down evenly using a hard and smooth object a few times.
-
Wait at least 24 hours before hanging to allow the adhesive to strengthen.
-
Hang the foam board on picture hooks. Note: Do not use wire in combination with foamboard plastic hangers. Picture wire can slice through the plastic over time. In addition, adhesive hangers are for indoor use only. Extreme cold or heat may cause the adhesive to fail.
-
When removing a plastic hanger, take care not to tear away any more substrate material than necessary. Do not attempt to reuse after removal as plastic adhesive hangers are intended for one-time use only.
Related Content
Everything You Need To Know About Foam Board Hangers
The Best Hangers for Lightweight Art
Frequently Asked Questions
Q How much weight can the Adhesive Picture Hanger | Zig-Zag Hanger hold?
The Adhesive Picture Hanger | Zig-Zag Hanger supports up to 3 lbs. For heavier items, use two hangers spaced apart to distribute the weight. Always verify your item's weight stays within the rated capacity.
Q What surfaces does the Adhesive Picture Hanger | Zig-Zag Hanger work with?
Check the product listing for surface and wall compatibility details.
Q How do I install the Adhesive Picture Hanger | Zig-Zag Hanger?
Clean the surface, peel off the adhesive backing, and press firmly onto a smooth, clean surface. Allow adequate time for the adhesive to cure for maximum hold strength.
Q What pack sizes is the Adhesive Picture Hanger | Zig-Zag Hanger available in?
Available in: 10 pack ($1.30 Each), 100 pack ($0.90 Each), 1000 pack ($0.72 Each). Per-unit pricing decreases with larger quantities.
Q What other options are available?
Related products include: Economy Plastic Hanger | Hang Tabs, Kwik Hanger, Magnetic Poster Hanger Ebony. Browse the full collection to compare options for your project.