high-density plastic hanger for foamboard or lightweight artwork
pressure-sensitive foam-backed with aggressive adhesive on one side
Strong Adhesive holds up to 3 pounds
2 1/2" x 1 7/8" x .04" thick
Made in the USA
Adhesive hangers are made of high-density plastic with a pressure-sensitive foam-backed adhesive on one side. The plastic used to make the Zig-Zag hanger is twice as thick as other foamboard hangers of this type and the foam-backed adhesive grips the smooth surface of the foamboard tenaciously. Also used to hang other types of lightweight artwork, photos, matted prints, posters, etc.
Helpful Notes about Plastic Adhesive Hangers
Do not use wire in combination with foamboard plastic hangers. Picture wire can gradually slice through the plastic over time. If you want to use wire to hang foamboard, pair it with one of our Foamboard Metal Hangers.
Do not use hanger to hang anything weighing over 3 lbs (one hanger) to 6 lbs (two hangers). These are light-duty hangers.
The adhesive strength of plastic hangers will improve if the bond is allowed to age 24-48 hours before hanging.
Use care when removing a plastic hanger so as not to tear away any more substrate material than necessary. Do not attempt to reuse either type of hanger after removing--they are intended for one-time use only.
For indoor use only. Extreme cold or heat may cause the adhesive to fail.