Wide Picture Rail Hook Zinc/Silver
S-HWR-2220X
About the product
Picture rail hooks are S-shaped hanging hardware designed to fit traditional wood picture rail molding (“Ogee" or "OG" molding) as part of a cable hanging system. Hanging pictures with picture rail hooks is damage-free with no drilling. Their elegance and great adjustability make them a staple in art galleries and museums, an appeal that also extends to enthusiasts who want to give their space the feeling of a real art gallery.
- Wide silver hook for hanging art from picture rail molding
- Measures 1 3/4" long, 1/2" wide, and 1/32” thick
- Supports up to 25 lbs (per hook)
- Zinc plating with silver finish
Instructions
With a gallery kit:
-
Hang the rail hooks onto the picture rail molding.
-
Insert a loop cord onto the rail hook.
-
Attach picture hooks to the loop cables and adjust accordingly.
-
Hang the frames.
Without a gallery kit:
-
Attach picture wire to the bottom/smaller bend of the rail hook, each long enough to extend down from the picture rail molding to the top of the frame on the wall.
-
To attach wire to a picture rail hook, make 2-3 tight loops around the bottom bend about 4" down from one end of the wire. Wrap the wire around itself to form a tight, compact coil about 1” to 1 1/2" long just below the bend, then clip off any excess wire.
-
Hang the rail hooks by the top/larger bend onto the picture rail molding, spaced apart roughly the same distance as the width of the frame to be hung. Let the loose ends of the wires dangle down. If necessary, hooks can be bent slightly for a better fit. Use two picture rail hooks per frame.
-
Insert the wire through the picture hanger on the frame. Raise the frame on the wall to roughly the height desired. Note: Strap Hangers or D-Ring Hangers should be installed at the top corners of a frame, aligned vertically just below the top edge. Position the hangers down just far enough from the frame's top edge so they won’t be noticeable from the front when the frame is hung.
-
Temporarily loop the picture wire around itself at the picture hanger to hold one side of the frame in position.
-
Repeat steps 3 and 4 for the other hook.
-
Adjust the position or spacing of the hooks on the picture rail molding as necessary. The two wires should be parallel.
-
Adjust the wire height as necessary by unlooping the wires on the picture hangers.
-
Wrap the wire at each picture hanger securely, making tight, compact coils. Clip off any excess wire.
Related Content:
Everything You Need to Know About Picture Rail Hooks
Frequently Asked Questions
Q How do I install wall hooks and what tools or hardware do I need?
To install a wall hook, grab a hammer, a pencil, and the included nail. Mark your spot, then lightly hammer the hook and nail into the wall until it's secure. Plenty more factors will go into wall hook installation, so check our guide here: Do's and Don'ts When Using Wall Hooks
Q Can I remove picture hooks without damaging my walls?
Yes! To remove the nail, grip it by the head and pull straight out at the same angle it was inserted using your fingers, pliers, or vise grips. Do not pry it using a screwdriver or a similar tool as this can damage the wall surface.
Q How much weight can wall hooks safely hold?
Our wall hanging hooks can handle a wide range, from lightweight 20-lb pieces to heavy items weighing up to 200 lbs. Check each product listing for the indicated weight rating.
Q What wall types are picture hooks compatible with?
We carry hooks for every wall type: drywall, plaster, wood, concrete, soft stone, brick, and masonry. Some are made for specific surfaces, while others work on all. Check the product listing to see which hook fits your wall best.
Q What kinds of frames or decor work best with picture hanging hooks?
Wall hooks are versatile hanging hardware used to hang items such as artwork, picture frames, mirrors, signs, or everyday objects. Although small, many wall hooks are built to hold medium-to-large items securely.