Extra T-Lock Metal Frame
S-SEC-3X
About the product
The T-head security screw is a T-shaped screw that locks frames into the bracket on a frame. It keeps the frame stable and diverts the risk of falling, theft, and earthquake damage. For frames wider than 24", these professional security screws provide extra support and security by an additional mounting point at the bottom of the frame, one at each corner of the bottom rail instead of only one at the center.
-
Optional extra hanging hardware for locking art pieces to the wall, especially high-value art and decor, in metal frames over 24" wide
-
Measures 1 9/16” long and ½” wide, anchor measures 1 ¼”
-
Includes blue anchor
-
Zinc-plated steel
-
JCAHO-compliant
Note:
Quantities of 25 or more are bulk packed (not packed as individual sets) -
Contact us if you need the kits packaged individually as this will incur an additional cost.
Instructions
-
Install the blue anchor and the T-head screw on the wall. When engaged, the T-head screw must be positioned 2” from the metal frame’s side edge. Use a security wrench to engage and disengage the screw when needed.
-
Hang the frame and lock it to the wall by turning the screw which sits in the bottom rail of the frame.
Related Content
Everything You Need To Know About Security Kits
Frequently Asked Questions
Q How do I install a security kit and what tools or hardware do I need?
You will need a need a security wrench and a power drill. For a full walk-through on the security hanging set installation, check out our article: Everything You Need To Know About Security Kits
Q Can I remove a security hanging set without damaging my walls?
We advise using a security wrench to reach the screw behind the frame without putting pressure on the wall. Avoid forcefully prying the frame off, and be extra gentle while slowly removing the screws.
Q How much weight can security kit safely hold?
Weight capacity depends on the security kit's hardware and design. Our anti-theft security lock hangers are built to support light to heavy artwork, with the frame lock kits holding between 15 lbs and 50 lbs per set.
Q What wall types are security kits compatible with?
Substrate compatibility generally depends on the kit's mounting hardware (the anchors and screws). For best results, check the product description for wall compatibility. Kits labeled "Lead Anchor Extra T-Lock for Brick/Concrete Wall" are designed specifically for masonry surfaces.
Q What kinds of frames or decor work best with security hanging systems?
Security kits are compatible for both wooden and metal frames.