SnapToggle Anchor BA 3/16 - 24
S-SC-ATOGIV
About the product
The SnapToggle anchor is an anchor system with a unique heavyweight design. Long plastic straps are attached to a small metal channel, which features a self-locking mechanism that allows you to remove the SnapToggle bolt without losing the anchor in the wall. Compared to wing toggles, SnapToggle anchors hold twice more weight and need a smaller hole in the wall, while also being reusable.
-
Heavy duty hollow wall anchors
-
Bolt measures 2 ½” long
-
Supports up to 802 lbs (in concrete blocks) and up to 238 lbs (drywall)
-
Includes 3/16 -24 bolt
Instructions
-
Drill a ½” hole in the wall.
-
Hold the metal channel flat against the plastic straps and insert the anchor into the hole.
-
Hold the end of the straps and pull towards you until the metal channel rests behind the wall.
-
Slide the cap along the straps until the flange is flush with the wall.
-
Snap off the plastic straps so they’re level with the flange of the cap.
-
Place your item over the anchor. Then insert and tighten the screw to secure it in place.
-
Reuse the SnapToggle anchor as needed.
Related Content
A Beginner's Guide to Using Wall Anchors
Everything You Need To Know About Picture Hanging Screws
Frequently Asked Questions
Q How do I choose the right picture hanging screws for my project?
The right screw depends on your wall type and hardware. Pan-head metal screws are used to install many of our picture hanging products like D-rings and strap hangers. Standalone wall screws like the Bear Claw and Wall Dog drive directly into drywall, plaster, or masonry to serve as hanging points. Wall anchors provide extra support in hollow walls. Check our guide: Everything You Need to Know About Picture Hanging Screws.
Q Can I use picture hanging screws on drywall without anchors?
Some screws like the Bear Claw and Wall Dog are designed to drive directly into drywall without anchors. For heavier items, we recommend using wall anchors like our Snap Skru drywall anchors, which provide additional support by spreading the load across a larger area of the wall.
Q How much weight can picture hanging screws safely hold?
Weight capacity varies by screw type and wall material. Standalone screws like the Wall Dog can support moderate loads in drywall. Adding wall anchors increases capacity significantly—our Snap Skru drywall anchors support up to 45 lbs. Check each product listing for the specific weight rating.
Q What wall types are these screws and anchors compatible with?
Our screw and anchor selection covers all wall types: drywall, plaster, brick, concrete, and wood. The Bear Claw and Wall Dog work on drywall, plaster, and masonry. Our concrete screws are designed for hard substrates. Check each product listing for wall compatibility.
Q What is the difference between a Bear Claw screw and a Wall Dog screw?
Both are standalone wall screws that drive directly into drywall without anchors. The Bear Claw has a wider head that acts as a built-in hook for hanging wire or D-ring hardware. The Wall Dog has a flat head design better suited for flush-mount applications. Both work on drywall, plaster, and masonry surfaces.