Bear Claw Screw Hanger - Gold
S-SC-BEARGX
About the product
The bear claw screw is a double-headed screw primarily for drywall. Its double head design forms a neck that fits any standard keyhole or cutout, and a sharp self-drilling tip conveniently allows you to skip the drilling process. With a bear claw screw, no pilot hole and wall anchor is required—just install it easily with a Phillips screwdriver.
-
Gold double-headed screw wall hangers and keyhole hangers for hanging pictures and wall decor on drywall, lath, plaster, or wood
-
Measures 1 3/16” long, shaft measures 3/16”, and head measures 0.29” in diameter
-
Supports up to 30 lbs (drywall, plaster) and up to 100 lbs (wood studs)
-
Gold finish
-
Use in conjunction with sawtooth hangers, wire, or D-ring hangers
Instructions
-
On the wall, mark the position where you’d like to install the screw.
-
Drill a 1/8" pilot hole if your wall is concrete, brick, or masonry. For drywall and other wall types, skip to step 3.
-
Install a wall anchor if your frame is over 30 lbs. or if not installing on wood stud.
-
Drive the bear claw screw into the wall using a screwdriver.
-
Hang your frame.
Related Content
Everything You Need To Know About Picture Hanging Screws
How to Tell if You Should Use a Bear Claw Screw or a Wall Dog Screw
Frequently Asked Questions
Q How do I choose the right picture hanging screws for my project?
The right screw depends on your wall type and hardware. Pan-head metal screws are used to install many of our picture hanging products like D-rings and strap hangers. Standalone wall screws like the Bear Claw and Wall Dog drive directly into drywall, plaster, or masonry to serve as hanging points. Wall anchors provide extra support in hollow walls. Check our guide: Everything You Need to Know About Picture Hanging Screws.
Q Can I use picture hanging screws on drywall without anchors?
Some screws like the Bear Claw and Wall Dog are designed to drive directly into drywall without anchors. For heavier items, we recommend using wall anchors like our Snap Skru drywall anchors, which provide additional support by spreading the load across a larger area of the wall.
Q How much weight can picture hanging screws safely hold?
Weight capacity varies by screw type and wall material. Standalone screws like the Wall Dog can support moderate loads in drywall. Adding wall anchors increases capacity significantly—our Snap Skru drywall anchors support up to 45 lbs. Check each product listing for the specific weight rating.
Q What wall types are these screws and anchors compatible with?
Our screw and anchor selection covers all wall types: drywall, plaster, brick, concrete, and wood. The Bear Claw and Wall Dog work on drywall, plaster, and masonry. Our concrete screws are designed for hard substrates. Check each product listing for wall compatibility.
Q What is the difference between a Bear Claw screw and a Wall Dog screw?
Both are standalone wall screws that drive directly into drywall without anchors. The Bear Claw has a wider head that acts as a built-in hook for hanging wire or D-ring hardware. The Wall Dog has a flat head design better suited for flush-mount applications. Both work on drywall, plaster, and masonry surfaces.