#6 Screws
S-SC-6038C
About the product
Pan head sheet metal screws are self-tapping screws with sharp precision threads that cut through metal, wood, fiberglass, and plastic. These screws are fully threaded and provide good retention in wood, making them the standard for attaching metal to wood.
-
#6 pan head metal screws and #6 x 1 ¼” flat head wood screw for attaching metal, wood, fiberglass, and plastic items
-
Slotted/Phillips (combo) top and flat head (wood screw)
-
Fully threaded sheet metal
-
Used in conjunction with French cleats, steel utility hooks, gallery systems, etc.
Instructions
-
Mark the desired position of the screw on the wall.
-
Drill a pilot hole in the marked spot.
-
Install a wall anchor in the pilot hole if needed.
-
Insert the screw and screw it in using a screwdriver.
Related Content
Everything You Need To Know About Picture Hanging Screws
Frequently Asked Questions
Q How do I choose the right picture hanging screws for my project?
The right screw depends on your wall type and hardware. Pan-head metal screws are used to install many of our picture hanging products like D-rings and strap hangers. Standalone wall screws like the Bear Claw and Wall Dog drive directly into drywall, plaster, or masonry to serve as hanging points. Wall anchors provide extra support in hollow walls. Check our guide: Everything You Need to Know About Picture Hanging Screws.
Q Can I use picture hanging screws on drywall without anchors?
Some screws like the Bear Claw and Wall Dog are designed to drive directly into drywall without anchors. For heavier items, we recommend using wall anchors like our Snap Skru drywall anchors, which provide additional support by spreading the load across a larger area of the wall.
Q How much weight can picture hanging screws safely hold?
Weight capacity varies by screw type and wall material. Standalone screws like the Wall Dog can support moderate loads in drywall. Adding wall anchors increases capacity significantly—our Snap Skru drywall anchors support up to 45 lbs. Check each product listing for the specific weight rating.
Q What wall types are these screws and anchors compatible with?
Our screw and anchor selection covers all wall types: drywall, plaster, brick, concrete, and wood. The Bear Claw and Wall Dog work on drywall, plaster, and masonry. Our concrete screws are designed for hard substrates. Check each product listing for wall compatibility.
Q What is the difference between a Bear Claw screw and a Wall Dog screw?
Both are standalone wall screws that drive directly into drywall without anchors. The Bear Claw has a wider head that acts as a built-in hook for hanging wire or D-ring hardware. The Wall Dog has a flat head design better suited for flush-mount applications. Both work on drywall, plaster, and masonry surfaces.