Metal Frame Snap Hanger
S-HWR-05X
About the product
Our metal frame snap hanger is the epitome of effortless framing. This unique boomerang-shaped hanging bracket features prongs on both sides angled low for a more seamless fit into the frame channel while a middle prong holds picture wire. The snap-on design makes a tool-free photo hanger installation possible—no need for tools, screws, or drills when you hang pictures.
-
Snap picture hangers for metal frames compatible with Nielsen profile #11 frames with a 3/8" channel opening
-
Measures 1” long and 1 ⅜” wide
-
Weight capacity is based on how heavy the metal frame itself is, not the hanger—check your frame’s manufacturer specifications to be sure.
-
Compatible with most standard metal picture frames in the market under Nielsen, Clark, Designer, Global Art, etc.
Instructions
-
Install one snap hanger each into the two side channels of the metal frame a third (⅓) of the way down the frame.
-
Attach picture wire onto the hangers. (Tip: Cut a length of picture wire 4-6 inches longer than the frame.) See instructions for picture wire in the listing images above.
-
From the middle, pull the wire 2-3 inches up to give it some slack.
-
Hang the frame.
-
To remove, place a flat blade screwdriver parallel to the frame and in the hole, then push while holding the frame secure.
Related Content
Everything You Need to Know About Metal Frame Picture Hangers
Dos and Don'ts When Using Metal Frame Hangers
Frequently Asked Questions
Q How do I install metal frame hangers and what tools or hardware do I need?
Most metal frame hangers snap, slide, or clip into the open channel of a standard Nielsen #11 profile metal frame—no tools required. Some designs are wire-compatible, allowing you to string picture wire between two hangers. For heavyweight metal frames, our French cleat kits include all hardware for installation. For a detailed guide, check our article: Do's and Don'ts When Using Metal Frame Hangers.
Q Can I remove metal frame hangers without damaging my walls?
Yes. Metal frame hangers attach to the frame's channel, not to the wall, so removing or swapping them causes no wall damage. Simply unclip or slide the hanger out of the channel.
Q How much weight can metal frame hangers safely hold?
Weight capacity depends on the hanger design and whether it's used with wire or as a direct-hang solution. Our metal frame hangers range from lightweight snap-in options to heavy-duty French cleat kits for large metal frames. Check each product listing for the specific weight rating.
Q What metal frame profiles are these hangers compatible with?
Our metal frame hangers are designed for the industry-standard Nielsen #11 profile, which has a 3/8-inch channel opening. This is the most common metal frame profile used by framers and manufacturers. Check the product listing to confirm compatibility with your frame.
Q What kinds of frames or decor work best with metal frame hangers?
Metal frame hangers are specifically designed for aluminum and metal picture frames with an open channel. They work well for framed prints, posters, photos, and certificates in standard metal frames. For wooden frames, see our wood frame hangers and D-ring collections.