Conventional 50 lb Hook
S-HWR-2054-50X
About the product
Conventional hooks, also called nickel hooks, are traditional hook-and-wire hangers with an angled nail and a special crimp design. These picture hangers are the framing industry standard and ideal for hanging art, mirrors, home decor, and other similar wall-mounted items.
- Zinc-plated picture hook for drywall and wood-paneled walls
- Measures 1 1/16" long and 3/16" wide, nail measures 1 3/16" long and 16 gauge
- Holds up to 50 lbs
- Corrosion-resistant zinc finish
Instructions
-
Mark the position of the hanger on the wall using a pencil, then hold the conventional hook in the marked position.
-
Hammer the nail gently into the nail socket until the hook is flush against the wall. Maintain the proper downward nail angle consistently; elongating the nail hole in the wall will reduce the shear strength of the hook. Do not overhammer as it will weaken the nail's grip, especially in drywall.
-
If you encounter a metal stud, move the hook slightly to the left or right of the stud position.
-
If using two hooks, space them apart evenly and repeat steps 1-2. You can also double or "gang" nickel-plated hooks by placing two or three together side by side to gain additional holding power. TIP: When hanging hook & wire hung picture frames, pictures will hang straighter and be more secure over time with two conventional hangers.
-
Hang the frame.
-
To remove nickel-plated hooks, pull back directly from the nail head at the angle of the nail using fingers, pliers, or vise grips. Prying a hook away from the wall with a screwdriver or a similar tool will often damage the wall surface. TIP: If you have to use a hammer claw to remove the nail, place a flat, solid surface, like a thin book, between the hammer's head and the wall.
-
To reuse a conventional hanger, ensure the hook and nail have not been bent or deformed.
Related Content
Everything You Need to Know About Wall Hooks
Do’s and Don’ts When Using Wall Hooks
Frequently Asked Questions
Q How do I install drywall hooks and what tools do I need?
To install a drywall hook, mark the hanging position on the wall with a pencil, hold the hook in place, and gently hammer the included nails at a 45-degree angle until the hook is flush against the wall. The raised nail sockets guide the nails at the correct angle. No power drill is needed.
Q Can I remove drywall hooks without damaging my walls?
Yes. To remove the nail, grip it by the head and pull straight out at the same angle it was inserted, using your fingers, pliers, or vise grips. Do not pry using a screwdriver, as this can damage the wall surface. The remaining hole is pin-sized and easy to patch.
Q How much weight can drywall hooks safely hold?
Our drywall hooks are available in 30 lb, 50 lb, and 100 lb weight ratings. For heavier items, use two hooks spaced apart to distribute the weight. When hanging hook-and-wire frames, two hooks also keep the picture straighter and more secure over time.
Q What is the difference between brass and conventional drywall hooks?
Both types function the same way and are available in the same weight ratings (30 lb, 50 lb, 100 lb). Brass hooks have a brass-plated finish with hardened blue steel nails, offering a more polished appearance. Conventional hooks have a zinc-nickel finish. Choose based on your aesthetic preference.
Q What kinds of frames or decor work best with drywall hooks?
Drywall hooks work with any frame or decor that uses hook-and-wire hanging. They are commonly used in art galleries and museums for hanging framed art, photographs, mirrors, and wall decor on drywall and plaster walls.