Brass 30 lb Hook
S-HWR-2332-30X
About the 30 Lbs Brass Hook
Brass hooks are reliable picture hangers that provide additional holding power for pictures. They come with pointed brass nails to maximize wall support while leaving only a pin-sized hole on the wall to minimize wall damage. These professional picture frame hangers are used often in art galleries and museums.
- Brass-plated picture hooks for hook and wire hanging on drywall, wood panels, and plaster walls
- Measures 1 1/8” long and ⅜” wide, nail measures 1 ⅜”
- Supports up to 30 lbs
- Brass-plated with hardened blue steel nail
Instructions
-
Mark the position of the hanger on the wall using a pencil, then hold the picture hook in the marked position.
-
Hammer the nail gently into the nail socket until the hook is flush against the wall. The raised nail socket on the hook will guide the nails into the wall at the proper 45-degree angle. Avoid over hammering as it can compromise the hook’s holding power and damage your wall.
-
If using two hooks, space them apart evenly and repeat steps 1-2. TIP: When hanging hook & wire hung picture frames, pictures will hang straighter and be more secure over time with two hangers.
-
Hang the frame.
-
To remove a brass-plated hook, pull the nail back at a 45-degree angle with a slight twisting motion using fingers or soft-faced pliers. Prying hooks away from the wall with a screwdriver or a similar tool will often damage the wall surface.
-
To reuse a brass-plated hanger, ensure the hook and nail have not been bent or deformed.
Related Content
Everything You Need to Know About Wall Hooks
Do’s and Don’ts When Using Wall Hooks
Frequently Asked Questions
Q How do I install drywall hooks and what tools do I need?
To install a drywall hook, mark the hanging position on the wall with a pencil, hold the hook in place, and gently hammer the included nails at a 45-degree angle until the hook is flush against the wall. The raised nail sockets guide the nails at the correct angle. No power drill is needed.
Q Can I remove drywall hooks without damaging my walls?
Yes. To remove the nail, grip it by the head and pull straight out at the same angle it was inserted, using your fingers, pliers, or vise grips. Do not pry using a screwdriver, as this can damage the wall surface. The remaining hole is pin-sized and easy to patch.
Q How much weight can drywall hooks safely hold?
Our drywall hooks are available in 30 lb, 50 lb, and 100 lb weight ratings. For heavier items, use two hooks spaced apart to distribute the weight. When hanging hook-and-wire frames, two hooks also keep the picture straighter and more secure over time.
Q What is the difference between brass and conventional drywall hooks?
Both types function the same way and are available in the same weight ratings (30 lb, 50 lb, 100 lb). Brass hooks have a brass-plated finish with hardened blue steel nails, offering a more polished appearance. Conventional hooks have a zinc-nickel finish. Choose based on your aesthetic preference.
Q What kinds of frames or decor work best with drywall hooks?
Drywall hooks work with any frame or decor that uses hook-and-wire hanging. They are commonly used in art galleries and museums for hanging framed art, photographs, mirrors, and wall decor on drywall and plaster walls.