Mega No-Stud 200 lb Hook
S-HWR-132
About the product
The Mega No-Stud Hook is a heavy-duty drywall hook with a unique design that allows the load of an item to be carried by the wall itself instead of the nails. No stud is required to install Mega No-Stud Hanging Hooks, and as long as the drywall is in good condition, you can hang large and heavy items without worry.
- Hanging hook for heavy art on 1/2" and 5/8" thick drywall
- Measures 2 6/16” long
- Holds up to 200 lbs (on drywall in good condition)
- Includes hook, three (3) nails, and wall mount
- No stud required
Instructions
-
Drill or punch an approximately 1/4" dia. hole in the drywall using a Phillips screwdriver, awl, or drill.
-
Insert the pointed end of the hook into the hole. Lift it as you push it through the hole until the back portion of the hook is seated up against the inside surface of the drywall.
-
Pull the hook back out slightly and slip the oval faceplate onto the front of the hook. Then reinsert the hook so that it is snug against the faceplate’s surface.
-
Nail the faceplate to the wall using the three nails provided.
-
Hang the frame.
Related Content:
6 Best Picture Hangers for Drywall
Frequently Asked Questions
Q How do I install drywall hooks and what tools do I need?
To install a drywall hook, mark the hanging position on the wall with a pencil, hold the hook in place, and gently hammer the included nails at a 45-degree angle until the hook is flush against the wall. The raised nail sockets guide the nails at the correct angle. No power drill is needed.
Q Can I remove drywall hooks without damaging my walls?
Yes. To remove the nail, grip it by the head and pull straight out at the same angle it was inserted, using your fingers, pliers, or vise grips. Do not pry using a screwdriver, as this can damage the wall surface. The remaining hole is pin-sized and easy to patch.
Q How much weight can drywall hooks safely hold?
Our drywall hooks are available in 30 lb, 50 lb, and 100 lb weight ratings. For heavier items, use two hooks spaced apart to distribute the weight. When hanging hook-and-wire frames, two hooks also keep the picture straighter and more secure over time.
Q What is the difference between brass and conventional drywall hooks?
Both types function the same way and are available in the same weight ratings (30 lb, 50 lb, 100 lb). Brass hooks have a brass-plated finish with hardened blue steel nails, offering a more polished appearance. Conventional hooks have a zinc-nickel finish. Choose based on your aesthetic preference.
Q What kinds of frames or decor work best with drywall hooks?
Drywall hooks work with any frame or decor that uses hook-and-wire hanging. They are commonly used in art galleries and museums for hanging framed art, photographs, mirrors, and wall decor on drywall and plaster walls.